These free crochet slippers are quick to make and feature a cute, low-cut design inspired by classic ballet flats. The higher heel helps the slippers stay comfortably on your feet, while the crocheted sole and shaped upper create a cozy fit.
The pattern uses basic crochet stitches along with increases and decreases and includes instructions for four women’s sizes: US 4/5, 6/7, 8/9, and 10/11. I’ve also included tips for adjusting the width and fit so you can customize your slippers if needed.
Make a cozy pair for yourself or crochet a few pairs for handmade gifts!
Looking for a little more coverage to keep your feet warm? Try my Crochet Bootie Slippers Pattern for an ankle-high alternative with a cozy textured cuff. The free pattern includes four women’s shoe sizes and is perfect for making a comfortable pair of handmade slippers for chilly days.
About This Crochet Slipper Pattern
Pattern Details
- Skill level: Intermediate
- Yarn: Worsted-weight yarn
- Yardage: Approximately 200 yd each of 2 colors
- Hook: 5 mm (US H-8)
- Gauge: 14 sc × 16 rows = 4 in. (10 cm)
- Sizes: Women’s US 4/5 (6/7, 8/9, 10/11)
- Construction: Crocheted sole with upper worked directly onto the sole
- Fit: Low-cut front and sides with a higher heel
Supplies
- Two colors of worsted-weight yarn, such as Vanna’s Choice (approx. 200 yd each)
- 5 mm (US H-8) crochet hook
- Tapestry needle and scissors for finishing
- Elastic yarn thread (optional)
This free pattern uses U.S. crochet terms and abbreviations. Resources and tutorials you may find helpful in following this pattern: Crochet Abbreviations, U.S. to U.K. Crochet Conversion Chart.
Crochet Abbreviations
beg = beginning
CA = color A
CB = color B
ch = chain
dc = double crochet
hdc = half double crochet
hdc2tog = half double crochet 2 stitches together
sc = single crochet
sc2tog = single crochet 2 stitches together
sl st = slip stitch
st(s) = stitch(es)
Add this pattern to your Ravelry library.
Prefer a printable version? This free pattern is also available as a convenient, ad-free, printer-friendly PDF for purchase.
Notes
The instructions below include women’s sizes 4/5 (6/7, 8/9, 10/11). See changes for each size in parentheses. Stitch counts are provided at the end of each row.
Crochet Slipper Instructions
Slipper Sole
With CA, ch 18 (21, 24, 27).
Round 1: Work 2 sc in 2nd ch from hook, 1 sc in each of next 10 (11, 13, 14), 1 hdc in next, 1 dc in each of the next 4 (6, 7, 9) ch, 5 dc in last ch, working along opposite side of ch, work 1 dc in each of the next 4 (6, 7, 9) ch, 1 hdc in next, 1 sc in each of the next 10 (11, 13, 14) ch, 2 sc in same ch as 1st sc of round, join in 1st sc, do not turn — 39 (45, 51, 57) sts.
Round 2: Ch 1 (does not count as st), 1 sc in same st as join, 2 sc in next, 1 sc in each of the next 9 (10, 12, 13) sts, 1 hdc in next 7 (9, 10, 12) sts, 2 hdc in next, 3 hdc in next, 2 hdc in next, 1 hdc in next 7 (9, 10, 12) sts, 1 sc in next 9 (10, 12, 13) sts, 2 sc in next, 1 sc in last, join in 1st sc, do not turn — 45 (51, 57, 63) sts.
Round 3: Ch 1 (does not count as st), 1 sc in same st as join, 2 sc in next, 1 sc in each of the next 19 (22, 25, 28) sts, 2 sc in next, 3 sc in next, 2 sc in next, 1 sc in each of the next 19 (22, 25, 28) sts, 2 sc in next, 1 sc in last, join in 1st sc, do not turn — 51 (57, 63, 69) sts.
Round 4: Ch 1 (does not count as st), 2 sc in same st as join, 1 sc in each of the next 21 (24, 27, 30) sts, 2 sc in next, 1 sc in next, 2 sc in next, 3 sc in next, 2 sc in next, 1 sc in next, 2 sc in next, 1 sc in each of the next 21 (24, 27, 30) sts, 2 sc in last, join in 1st sc — 59 (65, 71, 77) sts.
If using a second color for the upper, fasten off and join CB in the same st as the join; turn.
Slipper Upper
Round 1: Ch 1 (does not count as st), working in back loops only, work 1 sc in same st as join and each st around, join in 1st sc, do not turn — 59 (65, 71, 77) sts.
Round 2: Ch 2 (counts as hdc), working through both loops again, work 1 hdc in each of the next 5 (5, 6, 6) sts, 1 sc in next 17 (20, 22, 25) sts, hdc2tog 3 times, 1 hdc in next, hdc2tog 3 times, 1 sc in next 17 (20, 22, 25) sts, 1 hdc in each of the last 6 (6, 7, 7) sts, join in the top of the beg ch, do not turn — 53 (59, 65, 71) sts.
Round 3: Ch 2 (counts as hdc), work 1 hdc in next 2 (2, 3, 3) sts, sc2tog, 1 sc in each st around until 5 (5, 6, 6) sts remain, sc2tog, 1 hdc in last 3 (3, 4, 4) sts, join in the top of the beg ch, do not turn — 51 (57, 63, 69) sts.
Round 4: Ch 2 (counts as hdc), work 1 hdc in each of the next 5 (5, 6, 6) sts, 1 sc in next 13 (16, 18, 21) sts, hdc2tog 3 times, 1 hdc in next, hdc2tog 3 times, 1 sc in next 13 (16, 18, 21) sts, 1 hdc in each of the last 6 (6, 7, 7) sts, join in the top of the beg ch, do not turn — 45 (51, 57, 63) sts.
Round 5: Ch 2 (counts as hdc), work 1 hdc in next 2 (2, 3, 3) sts, sc2tog, 1 sc in each st around until 5 (5, 6, 6) sts remain, sc2tog, 1 hdc in last 3 (3, 4, 4) sts, join in the top of the beg ch, do not turn — 43 (49, 55, 61) sts.
Round 6: Ch 2 (counts as hdc), work 1 hdc in each of the next 4 (4, 5, 5) sts, 1 sc in next 10 (13, 15, 18) sts, sc2tog, hdc2tog 2 times, 1 hdc in next, hdc2tog 2 times, sc2tog, 1 sc in next 10 (13, 15, 18) sts, 1 hdc in each of the last 5 (5, 6, 6) sts, join in the top of the beg ch, do not turn — 37 (43, 49, 55) sts.
Round 7: Ch 2 (counts as hdc), work 1 hdc in each of the next 3 sts, sc2tog 2 times, 1 sc in each st around until 8 sts remain, sc2tog 2 times, 1 hdc in last 4 sts, join in the top of the beg ch — 33 (39, 45, 51) sts.
Fasten off and weave in ends.
Tips for Getting a Custom Fit
Because feet come in different widths and half sizes, and every yarn can produce a slightly different gauge, it’s difficult for one slipper pattern to provide a perfect fit for everyone. I’ve included a few tips below to help you customize the fit.
After completing one slipper, try it on and walk around for a few minutes. If it doesn’t fit quite right, try one of these adjustments:
Too small?
It’s actually best if the slipper is a bit snug at first. Since yarn stretches, it will quickly conform to your foot.
Too narrow?
For wider feet, try the following pattern variation:
Sole, Round 2: Ch 2 (counts as st), 2 hdc in next, 1 hdc in each of the next 9 (10, 12, 13) sts, 1 dc in next 7 (9, 10, 12) sts, 2 dc in next, 3 dc in next, 2 dc in next, 1 dc in next 7 (9, 10, 12) sts, 1 hdc in next 9 (10, 12, 13) sts, 2 hdc in next, 1 hdc in last, join in top of beg ch, do not turn — 45 (51, 57, 63) sts.
Too big?
If the slipper is big everywhere, it is probably best to make the next size smaller. If the slipper is just too loose at the top, try the following round change:
Upper, Round 7: Ch 2 (counts as hdc), work 1 hdc in next, sc2tog 3 times, 1 sc in each of the next 6 (9, 12, 15) sts, sc2tog, 1 sc in each of the next 5 sts, sc2tog, 1 sc in each of the next 6 (9, 12, 15) sts, sc2tog 3 times, 1 hdc in last 2 sts, join in top of beg ch — 29 (35, 41, 47) sts.
Making Your Crochet Slippers Last
Now that you’ve made a pair of cozy and perfectly fitting crochet slippers, you will want to make them last. The good news is that you can always crochet up another sole if your sole starts getting worn. One of my secret weapons is also elastic yarn thread. If the tops of your slippers start getting loose, weave some of the elastic thread through the stitches around the top opening to tighten it back up yet still allow some stretching. I love this trick for socks too.
Ideas for Decorating Your Crochet Slippers
If desired, you can make each pair of crochet slippers as unique as the person you are crocheting them for! Try sewing on a dainty bow, pretty button, or even a fun pom pom to the toe area. Experiment and make it your own!
Want to work up a pair for baby too? Check out this crochet baby booties pattern here.
More Crochet Patterns to Wear
Find Community
I would love to see your finished projects; share them with me on Instagram, Facebook, or the Petals to Picots Community.
I recently purchased the pattern for Ladies Slippers. I was really looking forward to making these slippers. But I have found that I’m very disappointed. I have made the soul part of the slipper three times with even a larger hook and they are all still so small they could never fit my foot. Even the largest size! At this point, the pattern is useless to me. I am a very experienced crocheter so I know what I’m doing. If any of you can give me any help, I would really appreciate it. Thanks so much.
How do you make the left foot? Do you just flip over the sole before starting the upper?
I too have one of the smallest soles I’ve ever seen. I did size 10/11 for my daughter and it barely fits my size 8 foot. I love this pattern but I’m sure this can’t be right. I’m gonna try using a size I hook and see, but I can’t see it fitting her foot. I’m gonna finish this but I know it’s not wide enough.
I’m using 2 strands of Coastal Cotton yarn. It works up fine for size. Row 4 ends up with one extra stitch before you join. Also the patter is for only a right foot, there should be a second patter for a left foot sole.
The House shoes crochet slippers are very nice .Thank you
I see that this question was asked before but I don’t see an answer. Is the sole only 4 rounds? This makes a very tiny sole. The picture of the complete sole shown above is much more than 4 rounds.. so I am not sure what I am missing. I reread the pattern as shown above many times and I can not figure out what I am missing. Please help
Round 4 of the sole (for size 8/9) doesn’t add up. Is something missing? I followed the directions up until the second row of 27st, but there are still the stitches for the heel that are missing.
“Round 4: Ch 1 (does not count as st), 2 sc in same st as join, 1 sc in each of the next 21 (24, 27, 30) sts, 2 sc in next, 1 sc in next, 2 sc in next, 3 sc in next, 2 sc in next, 1 sc in next, 2 sc in next, 1 sc in each of the next 21 (24, 27, 30) sts, 2 sc in last, join in 1st sc — 59 (65, 71, 77) sts.”
*Second set of 27st